RESITRIX® SKW FULL BOND

RESITRIX® SK W EPDM waterproofing membrane

Self-adhesive and root-resistant EPDM membrane

RESITRIX® SK W Full Bond is a fully self-adhesive, hot air-weldable and root-resistant EPDM waterproofing membrane with FLL test certificate and approval according to DIN EN 13948.
RESITRIX® SK W is therefore particularly suited to full-surface bonding and all types of green roof too.

RESITRIX® SK W is also suitable for infiltration-proof waterproofing in the building waterproofing sector.

  • Certified service life of more than 50 years and also named the only product of its kind for joining seams (according to a study conducted by the German Plastics Centre)
  • Simple and safe installation without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • Sustainable (EPD-certified and DGNB-compliant)

Reference with product RESITRIX® SKW FULL BOND

Arnheim

Floating Homes, Hamburg, D

Library of the Technical University of Delft, NL

Apiary, Apelern, DE

View more references here

Tips and tricks for installing RESITRIX®

Material benefits:

  • No additional surface protection; permanently resistant to ozone, UV radiation and infrared radiation
  • Root-resistant
  • Single-layer waterproofing
  • Permanently elastic and flexible
  • Ultimate elongation of more than 500%
  • Practically free from shrinkage throughout its entire service life
  • Permanently elastic and flexible at low temperatures of down to -40°C
  • Resistant to micro-organisms
  • Capable of withstanding a multitude of chemical substances and environmental emissions
  • 100% bitumen-resistant
  • Free from plasticisers and chlorine
  • No shattering effect
  • Environmentally friendly and recyclable

Laying-related benefits:

  • Simple and safe laying without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • Fully self-adhesive system
  • The entire underside of the EPDM membrane can be welded
  • Non-slip surface, even when wet
  • No additional measures required for the T-joint area
  • Can be welded with hot air down to -10°C

RESITRIX® SK W is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base and a glass fabric liner. The underside has a self-adhesive, polymer-modified layer of bitumen that is protected by a detachable release film.

  • Thickness of the EPDM layer: 1.6 mm
  • Total membrane thickness: 2.5 mm
  • Surface weight: Approx. 2.75 kg/m²
  • Standard delivery length per roll: 10 m
  • Standard delivery width: 1 m (strips upon request)
  • Membrane designation acc. to DIN SPEC 20000-201: DE/E1 EPDM-BV-V-GG-1.6-SK
  • Membrane designation acc. to DIN SPEC 20000-202: BA/MSB-nQ EPDM-BV-V-GG-1.6-SK
  • CE certification acc. to DIN EN 13956, DIN EN 13967 and DIN EN 14909
  • Root-resistant acc. to the FLL test report compiled by the FG/FU Weihenstephan Test Institute of Gardening and Horticulture, and acc. to DIN EN 13948
  • Satisfies the requirements acc. to DIN 18531, the specialist regulations for waterproofing systems (Flat Roof Guidelines) acc. to DIN 18532, DIN 18533, DIN 18534 and DIN 18535

The following Installation variants are possible:

  • Self-adhesion on full-surface primer
  • Self-adhesion without primer (on exposed or fresh bitumen substrate only)
  • Laying without primer with additional mechanical fixation, including installation tack welding
+ Product benefits

Material benefits:

  • No additional surface protection; permanently resistant to ozone, UV radiation and infrared radiation
  • Root-resistant
  • Single-layer waterproofing
  • Permanently elastic and flexible
  • Ultimate elongation of more than 500%
  • Practically free from shrinkage throughout its entire service life
  • Permanently elastic and flexible at low temperatures of down to -40°C
  • Resistant to micro-organisms
  • Capable of withstanding a multitude of chemical substances and environmental emissions
  • 100% bitumen-resistant
  • Free from plasticisers and chlorine
  • No shattering effect
  • Environmentally friendly and recyclable

Laying-related benefits:

  • Simple and safe laying without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • Fully self-adhesive system
  • The entire underside of the EPDM membrane can be welded
  • Non-slip surface, even when wet
  • No additional measures required for the T-joint area
  • Can be welded with hot air down to -10°C
+ Product properties

RESITRIX® SK W is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base and a glass fabric liner. The underside has a self-adhesive, polymer-modified layer of bitumen that is protected by a detachable release film.

  • Thickness of the EPDM layer: 1.6 mm
  • Total membrane thickness: 2.5 mm
  • Surface weight: Approx. 2.75 kg/m²
  • Standard delivery length per roll: 10 m
  • Standard delivery width: 1 m (strips upon request)
  • Membrane designation acc. to DIN SPEC 20000-201: DE/E1 EPDM-BV-V-GG-1.6-SK
  • Membrane designation acc. to DIN SPEC 20000-202: BA/MSB-nQ EPDM-BV-V-GG-1.6-SK
  • CE certification acc. to DIN EN 13956, DIN EN 13967 and DIN EN 14909
  • Root-resistant acc. to the FLL test report compiled by the FG/FU Weihenstephan Test Institute of Gardening and Horticulture, and acc. to DIN EN 13948
  • Satisfies the requirements acc. to DIN 18531, the specialist regulations for waterproofing systems (Flat Roof Guidelines) acc. to DIN 18532, DIN 18533, DIN 18534 and DIN 18535
+ Installation variants

The following Installation variants are possible:

  • Self-adhesion on full-surface primer
  • Self-adhesion without primer (on exposed or fresh bitumen substrate only)
  • Laying without primer with additional mechanical fixation, including installation tack welding

Downloads for system accessories

RESITRIX® SK W Datasheet

RESITRIX® Product Catalogue

RESITRIX® Installation Instructions

RESITRIX® Specification Guidlines

RESITRIX® Specification Guidlines

Suitable RESITRIX® accessories