RESITRIX® MB two rolles

RESITRIX® MB mechanically fixed EPDM waterproofing membrane

EPDM sheets for mechanical fixing

RESITRIX® MB is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base. RESITRIX® MB is particularly suited to mechanical fixation and loose laying with ballasting. It also meets the FM Standard Class No. 4470 (FM Approval).

RESITRIX® MB is also suitable for loose laying in the building waterproofing sector.

  • Certified service life of more than 50 years and also named the only product of its kind for joining seams (according to a study conducted by the German Plastics Centre)
  • Simple and safe installation without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • Sustainable (EPD-certified and DGNB-compliant)

References with RESITRIX® MB

Zaandam Distribution Centre (NL)

Pakhuis Meesteren, Rotterdam (NL)

House of Energy, Kaufbeuren, DE

Tips and tricks for installing RESITRIX®

Material benefits:

  • No additional surface protection; permanently resistant to ozone, UV radiation and infrared radiation
  • Single-layer waterproofing
  • Ultimate elongation of more than 500%
  • Practically free from shrinkage throughout its entire service life
  • Permanently elastic and flexible at low temperatures of down to -40°C
  • Resistant to micro-organisms
  • Capable of withstanding a multitude of chemical substances and environmental emissions
  • 100% bitumen-resistant
  • Free from plasticisers and chlorine
  • No shattering effect
  • Environmentally friendly and recyclable

Installation related benefits:

  • Simple and safe Installation without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • The entire underside of the EPDM membrane can be welded
  • Non-slip surface, even when wet
  • No additional measures required for the T-joint area
  • Can be welded with hot air down to -10°C

RESITRIX® MB is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base and a glass fabric liner. The underside has a polymer-modified layer of bitumen with PE film.

  • Thickness of the EPDM layer: 1.6 mm
  • Total membrane thickness: 3.1 mm
  • Surface weight: Approx. 3.5 kg/m²
  • Standard delivery length per roll: 10 m
  • Standard delivery width: 1 m (strips upon request)
  • Membrane designation acc. to DIN SPEC 20000-201: DE/E1 EPDM-BV-V-GG-1.6-PBS
  • Membrane designation acc. to DIN SPEC 20000-202: BA/MSB-Q/MSB-nQ EPDM-BV-V-GG-1.6-PBS
  • CE certification acc. to DIN EN 13956 and DIN EN 13967
  • FM Approval Standard Class No. 4470
  • Satisfies the requirements acc. to DIN 18531, the specialist regulations for waterproofing systems (Flat Roof Guidelines) acc. to DIN 18532, DIN 18533, DIN 18534 and DIN 18535

The following Installation variants are possible:

  • Mechanical fixation
  • Loose laying with ballasting
resitrix-uploads-produkt-mb-verlegevarianten-EN
+ Product benefits

Material benefits:

  • No additional surface protection; permanently resistant to ozone, UV radiation and infrared radiation
  • Single-layer waterproofing
  • Ultimate elongation of more than 500%
  • Practically free from shrinkage throughout its entire service life
  • Permanently elastic and flexible at low temperatures of down to -40°C
  • Resistant to micro-organisms
  • Capable of withstanding a multitude of chemical substances and environmental emissions
  • 100% bitumen-resistant
  • Free from plasticisers and chlorine
  • No shattering effect
  • Environmentally friendly and recyclable

Installation related benefits:

  • Simple and safe Installation without any need for naked flames
  • 100% leak-tight welded seam – simple visual inspection
  • The entire underside of the EPDM membrane can be welded
  • Non-slip surface, even when wet
  • No additional measures required for the T-joint area
  • Can be welded with hot air down to -10°C
+ Product properties

RESITRIX® MB is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base and a glass fabric liner. The underside has a polymer-modified layer of bitumen with PE film.

  • Thickness of the EPDM layer: 1.6 mm
  • Total membrane thickness: 3.1 mm
  • Surface weight: Approx. 3.5 kg/m²
  • Standard delivery length per roll: 10 m
  • Standard delivery width: 1 m (strips upon request)
  • Membrane designation acc. to DIN SPEC 20000-201: DE/E1 EPDM-BV-V-GG-1.6-PBS
  • Membrane designation acc. to DIN SPEC 20000-202: BA/MSB-Q/MSB-nQ EPDM-BV-V-GG-1.6-PBS
  • CE certification acc. to DIN EN 13956 and DIN EN 13967
  • FM Approval Standard Class No. 4470
  • Satisfies the requirements acc. to DIN 18531, the specialist regulations for waterproofing systems (Flat Roof Guidelines) acc. to DIN 18532, DIN 18533, DIN 18534 and DIN 18535
+ Installation variants

The following Installation variants are possible:

  • Mechanical fixation
  • Loose laying with ballasting
resitrix-uploads-produkt-mb-verlegevarianten-EN

Downloads for system accessories

RESITRIX® MB Datasheet

RESITRIX® Product Catalogue

RESITRIX® Installation Instructions

RESITRIX® Specification Guidlines

RESITRIX® Specification Guidlines

Suitable RESITRIX® accessories