You are here:
  1. Home
  2. Systemzubehör GB
  3. RESITRIX® EPDM pipe sleeve 

RESITRIX® EPDM pull-over sleeves

The RESITRIX® pull-over sleeves are prefabricated, weldable EPDM sleeves for sealing round, slip-over roof ducts with diameters of 5 – 35 mm (small) to 35 – 100 mm (large). The connection collar is made from a circular cut-out of RESITRIX® SK W Full Bond. The connection collar’s waterproof connection to the roof waterproofing solution is made safely and easily using hot-air welding.

Contact Us
RESITRIX® EPDM pull-over sleeves

Areas of application

  • All RESITRIX® waterproofing solutions that are not used with primer
  • Bitumen waterproofing solutions that are not used with primer (remove rough chip surfacing beforehand)
  • APP bitumen waterproofing solutions that are not used with primer
  • Liquid plastic waterproofing solutions that are free from plasticisers and are used with the FG 35 surface primer
  • Various plastic membranes that are free from plasticisers and are used with the FG 35 surface primer
Please consult our Technical Department for any applications that are not mentioned.
Find your contact person here

Benefits of RESITRIX® pull-over sleeves

    • There is no need to cut moulded parts by hand first of all
    • Quick and easy installation
    • Safe installation without any need for naked flames
    • 100% leak-tight welded seam – simple visual inspection
    • Bitumen-resistant

More information in our product datasheets:

RESITRIX® Pipe Sleeve (5-35mm)

RESITRIX® Pipe Sleeve (35-100 mm)

Anwendungsvideo Dunstrohreinfassung mit RESITRIX® Stülpmanschette

Im Video erklärt unser Anwendungstechniker Oliver Glöckner, wie Sie mit unseren vorgefertigten RESITRIX® EPDM-Stülpmanschetten Dachdurchführungen sicher und schnell eindichten können.
Die oberseitige Verwahrung erfolgt durch ein Schellenband aus Edelstahl. Bei Verwendung eines Schrumpfschlauches zur Verlängerung entfällt die Absicherung durch das Schellenband.

weitere Videos ansehen

Types of RESITRIX® EPDM pull-over sleeves

RESITRIX® EPDM pull-over sleeves (35 – 100 mm)

EPDM moulded part for sealing slip-over roof ducts with a round cross-section of 35 – 100 mm. The connection collar is made from a circular cut-out of RESITRIX® SK W with a diameter of 50 cm.

  • Nominal thickness: 2.5 mm ± 10%
  • Total width: 500 mm ± 0.8%
  • Diameter of duct, cross-section: 35 – 100 mm

RESITRIX® EPDM pull-over sleeves (5 – 35 mm)

EPDM moulded part for sealing slip-over roof ducts with a round cross-section and with a diameter of 5 to 35 mm. The connection collar is made from a circular cut-out of RESITRIX® SK W with a diameter of up to 30 cm.

  • Nominal thickness: 2.5 mm ± 10%
  • Total width: 300 mm ± 0.8%
  • Diameter of duct, cross-section: 5 – 35 mm

Downloads for the system accessory product

RESITRIX® Pipe Sleeve (35-100 mm) Datasheet

RESITRIX® Pipe Sleeve (5-35 mm) Datasheet

RESITRIX® Installation Instructions

RESITRIX® Product Catalogue